Incoloy800/800H/800HT Nickel Alloy Steel Plate 3.0*1219*2438mm

Incoloy 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called "orange peel”. Incoloy 800HT can be welded by the common techniques used on stainless steels.

Inconel 800 or Incoloy 800, or perhaps even 800H or 800HT. Inconel 800 goes by many names and carries with it a few variations. Incoloy 800 originally developed by Special Metals has been around since the 1950s but back then, Nickel wasn't as widely available and really only used for special cases when producing certain steels. This grade has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.

The variations of this grade come in 2 forms, Incoloy 800H and Incoloy 800HT. The 800 variety has a higher level of Carbon than the straight 800 counterpart which allows for a higher creep. Incoloy 800 HT features a restricted elemental structure that is within standard 800H chemistry but also requires heat treating. The variation of the Carbon, Aluminum and Titanium give the 3 grades of 800, 800H and 800 HT similar properties but not 100% the same, thus the need to split out this group into 3 alloys.

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies. They are mostly nickel-based, and designed for excellent corrosion resistance as well as strength at high temperatures; there are specific alloys for resistance to particular chemical attacks (e.g. alloy 020 is designed to be resistant to sulphuric acid, DS to be used in heat-treating furnaces with reactive atmospheres and many heat cycles)

Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Incoloy brand alloys.The corrosion-resistant superalloys are widely used in extreme environments where tremendous heat and corrosion resistance is paramount to the integrity of the end product. Chemical and petrochemical processing, power plants, and oil and gas industries widely use these superalloys.

In what forms is Incoloy® 800/800H/800HT available at Prosaic Steel?

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire

What are the characteristics of Incoloy 800/800H/800HT?

• High temperature strength
• High creep rupture strength
• Resistant to oxidation and carburization in high temperature environments
• Good corrosion resistance in many acidic environments
• Good resistance to many sulfur-containing atmospheres

Inconel 800 / 800H /800HT Plate Grade and Specification

Alloy 800 (UNS N08800) Plate Chemical Composition, %

Alloy 800H (UNS N08810) Plate Chemical Composition, %

Alloy 800HT (UNS N08811) Plate Chemical Composition, %

*Note that the chemical composition of Incoloy 800HT will always be within the limits of Incoloy 800H.

*Note the limits of Incoloy 800H may or may not be within the limits of Incoloy 800HT.

• Density: .287 lb/in3
• Melting Range: 2475-2525°F
• Specific Heat Btu/lb-°F: 0.12
• Poisson's Ratio at 75°F: .339
• Modulus of Elasticity, Tensile Modulus at 75°F: 28.5 psi x 106

Linear Coefficient of Thermal Expanison

Thermal Conductivity

Mechanical Properties and Yield Strength of Alloy 800H / HT

Incoloy 800 / 800H / 800HT Sheets Plates Packaging

Inconel 800 / 800H / 800HT Plates, Sheets, Coil are Packed in Wooden Pallet, wooden Box and Carrate

we provide high Quality Packing so the Incoloy 800 / 800H / 800HT Plates, Sheets and Coil will remain safe during shipment and transportation

Other Equivalent Grade for Inconel and Incoloy

Incoloy and Inconel Plates Types

• INCONEL 600 Plate, Sheet, Coil– UNS N06600
• INCONEL 601 Plate, Sheet, Coil – UNS N06601
• INCONEL 625 Plate, Sheet, Coil– UNS N06625
• INCONEL 800 Plate,Sheet, Coil – UNS N08800
• INCONEL 800H Plate, Sheet, Coil– UNS N08810
• INCONEL 800HT Plate, Sheet, Coil - UNS NO8811
• INCONEL 825 Plate, Sheet, Coil– UNS N08825

3.0*1219*2438mm Incoloy800 Nickel Alloy Steel Plate

NS Incoloy800 Nickel Alloy Steel Plate

Incoloy800/800H/800HT Nickel Alloy Steel Plate 3.0*1219*2438mm NS N08800 Sheet 0.5-3mm Images